By default , both nodes wireless devices comes with a client firmware, so
to create a link, switch one of the 2 node wireless device to an access
point mode to create a link (refer to the “mode” section ).
Point to multi-point
In that case we create a point to multi-point link between 4 Ethernet
DMX8/W nodes.
By default , both nodes wireless devices comes with a client firmware, so
to create a link, switch one of the 4 node wireless device to an access
point mode to create a link (refer to the “mode” section ).
Always keep in mind you can't stream more than 8 universes
between two Ethernet-DMX 8/W on a 5Ghz link, 4 universes on a
2.4Ghz link, 8 universes on a 2.4Ghz link in unicast mode !
You can't stream more than 2 universes between a Node 2/W and
a Node 8/W. For instance, you can run 8 universes from a
Ethernet-DMX 8/W to 4 Ethernet-DMX2/W, with unicast mode
enabled. Each wireless link will composed of 2 universes.
The use of wireless bi-directionality and the enhanced features of the node
8/W allows you to work in a two way system, meaning that you can
control lights attached to B from a desk attached to D.
Page 50 of 54
Ethernet - DMX8 / WiFi
