Luminex Ethernet - DMX8 / WiFi, User Manual

Page: 15 / 54

➢ DMX input
To setup an outlet as input, follow the following procedure.
Choose
DMX Config, Outlet route
press
Enter
and select the outlet with
the left right keys.
Enable
Yes Enables the outlet
No Disables the outlet
Dir (Direction)
Output Sets the outlet as DMX output
Input Sets the outlet as DMX input
Ethernet - DMX8 / WiFi Page 15 of 54
Enter
> > > > > >
< < < < < <
+
Enter
> > > >
< < < <
Enter
N O
YES Enter
+
-
INPUT Enter
+
-
Enter
Enter
+
-
Enter
Enter
Enter
> >
< <
DMX Config
Outlet route > DMX Config
< FrameRate > DMX Config
< Break Time > DMX Config
< MAB Time >
DMX Config
Outlet : 1 > DMX Config
< Outlet : 2 > DMX Config
< Outlet : 8
Outlet : 1
Enable : YES
Outlet : 1
Dir: OUTPUT Outlet : 1
Dir: INPUT
Outlet : 1
Mode : NORMAL Outlet : 1
Mode : MERGE
Outlet : 1
Univ: 0 (00)
Outlet : 1
IP Merging: OFF Outlet : 1
IP Merging: BCK
Outlet : 1
Backup ms: 400ms
Outlet : 1
Recover: AUTO
Save setup ?
CONFIRM >
Save setup ?
< CANCEL
Set the DMX input mode: NORMAL or MERGE
Select the DMX line address. The combined
ArtNet universe address is shown in
brackets. This is the combination of the
outlet's subnet and subswitch.