For multipoint or point to point configurations, pay attention for each
Ethernet DMX2/W or Ethernet DMX8/W to run the same SSID and the
same channel.
If you run your show in a very disturbed environment, it can be useful to
set your main Node (A in this example) with a static channel, and all the
others node with a dynamic channel, allowing you to change your
complete network channel “on the fly”.
To connect other wireless devices such as Laptop or PDA, set theses
devices in the same IP range and connect them to the A Ethernet DMX8/W
through their own wireless connection wizard.
Keep in mind that the working distances between other wireless devices to
Ethernet DMX8/W depends of their radio emitting power & receiving
sensibility .
Repeater
It can be useful to use a wireless system for a non line of site situation.
But regarding environmental situation (buidings, water, trees..), using a
repeater can sometimes be the only only fashion to achieve your project.
To do so, you can use a Node 8/W and set its wireless device to act as an
access point ( Node B on the drawing). The 2 others nodes will be set as
clients. Thus they now communicate through the centralized access point.
Ethernet - DMX8 / WiFi
Page 51 of 54
