In this setup, the right lighting software (S2) is used in the same time as
the left lighting desk (S1). Both streams are merged through the final
output on the right node.
The IP Merging mode provides the following policies when an outlet is set
as output:
–
HTP, for all outlet channels
–
LTP, for all outlet channels
–
Custom, to create a complete soft patch, to set merging policy for
every single channel by IP source and to use the enhanced trigger
system. Once Custom is selected, the universe number will disappear
in the outlet's universe setting row.
If you choose “Custom”, click on the blue icon left sided to the “Outlet”
label. A pop up frame appears:
You can find in this pop up frame similar features as when using the
Ethernet - DMX8 / WiFi
Page 31 of 54
Illustration 6: DMX Output custom IP merging
