universe you will be able to set the starting DMX channel address (1-512).
This indicates from which channel address the second input has to be
merged in. This offset is only available when using
HTP
or
LTP
policies.
Those rules will be applied on all channel of the universe.
If you choose “
Backup
”, a small blue icon will appears on the left side of
“Outlet 2” label; then click on it, a pop up frame appears :
This menu lets you choose the backup time (from 400 to 9999ms). This
time represents the delay from which the node will automatically switch to
the backup outlet when invalid or no DMX is received anymore on the
primary outlet.
Tick the box if you want the node to auto-recover as soon as valid data is
available again on primary connector.
If you tick off the box, you will have to enable the trigger universe and
select a recover channel (page Error: Reference source not found).
If you choose “
Custom
” policy, a small blue icon will also appear on the
left side of “Outlet 2” label; then click on it, a new pop up frame appears :
Page 28 of 54
Ethernet - DMX8 / WiFi
Illustration 2: DMX Input backup merging
