Web interface
Home
The complete device can be configured from an intuitive web interface.
You just have to browse to one of the IP addresses mentioned in the root
screen sequence.
Make sure that you computer, you use to browse, is setup in the correct
network address range (IP 2.x.x.x or 10.x.x.x and subnet 255.0.0.0).
When you're not using a complete network setup (Ethernet switches,
hubs, routers, WLAN, ...), you can also use a cross Ethernet cable to
directly connect to one unit.
After all connections and setup on the computer are completed, open your
favorite web browser and enter the IP address you want to reach in the
URL field.
Http://2.0.0.2/
You'll end up at the status page of the device. This page has a complete
overview of the device settings.
The overview shows the actual DMX and network setting / routing of the
complete device.
Page 24 of 54
Ethernet - DMX8 / WiFi
Navigation Bar
Actual DMX routing
Actual Global settings
Actual Network settings
