- 4 -
LX400+ UV LED Spot Curing System
2.2
Safety Precautions
This series of cautions and warnings relate to the
installation, operation and maintenance of the
OmniCure LX400+.
They are also presented
throughout this User‟s Guide as applicable.
WARNING
The protective eyewear provided is designed only for
viewing of indirect UV light on an intermittent basis.
Consistent with this intended use, this eyewear meets
the exposure limits as defined by HSM-73-11009 from
the U.S. Department of Health, National Institute for
Occupational Safety and Health. Additional protective
UV shielding is recommended for any process that
requires direct viewing or visual monitoring of UV light
for extended periods of time. It is the responsibility of
the end user to ensure that adequate safeguards are
implemented to prevent any potential hazardous UV
exposure.
CAUTION
The LED's available for this system provide optical
output power classified as
RISK GROUP 2
as per IEC/
EN 62471-2. The user related risk of this system is
dependant on the final installation and use of this
product as detailed within this manual.
Always follow the installation guidelines as detailed in
Section 4.0
of this manual. Use of this system in any
manner not specified by Lumen Dynamics may expose
the user to potentially hazardous optical radiation and
UV.
