- 34 -
LX400+ UV LED Spot Curing System
7.
External Control
7.1
Foot Pedal (FP)
7.1.1
Insert the foot pedal(s) 1 through 4 into connection
ports on the rear panel of the controller (ref.
The system has the option of installing quantities 1 to
4 foot pedals.
7.1.2
The foot pedal does not disable the START/STOP
button and can be used simultaneously with the
START/STOP button on the front panel in any mode or
setting.
7.1.3
In
“
cnt.d
” mode click the foot pedal to start the LED
emission, If the foot pedal is clicked during a timed
emission in progress the emission will be terminated
and the associated LED head(s) will turn off.
7.1.4
When in
“
cnt.u
” mode the timer will count up as long
as the foot pedal is pressed and stop when the foot
pedal is released.
7.1.5
The Start/Stop button overrides all foot pedal
configurations.
7.1.6
To configure the channel emissions with the foot pedal
controls reference
7.1.7
Press and hold the “
MODE
” button until the display
reads either
FP-1
through
FP-6
. The read-out will
display the last FP mode chosen.
7.1.8
Press the
UP
or
Down
buttons to scroll through foot
pedal selection
FP-1
to
FP-6
. Reference
for
foot pedal channel control configurations.
