- 30 -
LX400+ UV LED Spot Curing System
5.10
LED Display Mode S/C
Note: To have the timer displayed during operation.
This must be set prior to the start of the process;
5.10.1
Press and hold any channel button
5.10.2
Press mode button
5.10.3
Press up or down button to display
(ref. table 3)
5.10.4
Press the highlighted channel button to return previous
mode.
Note: To have the temperature displayed during
operation. This must be set prior to the start of
the process;
5.10.5
Press and hold any channel button
5.10.6
Press mode button
5.10.7
Press up or down button to display
(ref. table 3)
5.10.8
Press the highlighted channel button to return to
previous mode.
5.11
Temperature Display
5.11.1
To read the temperature of each head during process
operation Refer to
section 5.10
for in operation display.
5.11.2
During operation select channels 1 through 4 to read
the temperature of the attached head.
5.11.3
During process stoppage press Mode button until the
Trigger LED comes on (color green).
5.11.4
Select Channels 1 through 4 to read the temperature
of attached head.
