- 26 -
LX400+ UV LED Spot Curing System
5.5.2
When emission level % of selected channel(s) is
disabled „
OFF
‟ (refer to section 5.4), during process
countdown (using either the start/stop button or the
Foot Pedal) the user is able to select that disabled
channel from the front panel and the display will
indicate selected channel
„OFF‟
for a period of one
second if an exposure is requested.
5.5.3
The user can also select an enabled channel from the
front panel and the channel will display
„OFF‟
upon
completion of the process countdown for the selected
enabled channel.
5.5.4
Once the complete process has finished, the selected
enabled or disabled channel will default from
„OFF‟
back to it‟s original timer setting.
Note
:
If selecting the channel with the longest process time
programmed, this channel will not display ‘
OFF
’ upon
completion of the process count down
.
5.6
Trigger Control
5.6.1
Controls the emission trigger selection for all LED
heads at once (not individually) for count up (
cnt.u
) or
count down (
cnt.d
) enabling the LED head to emit light
for the selected emission time. The value set works for
all 4 heads.
5.6.2
Press and release the
MODE
button until the
TRIGGER
LED on the front panel comes on (color
green).
5.6.3
Press and release the
UP
or
DOWN
button for count
up or count down.
“
cnt.u
” for manual control, “
cnt.d
”
for automatic control.
