Safety-Related Electrical, Physical, and Environmental Information
Electrical and electronic information
The Stinger® Compact Remote ATM DSLAM Getting Started Guide
D-5
Electrical and electronic information
The Stinger CR unit is nominally powered from an Argus CSM36-BC power source.
Table D-1 describes Stinger CR electronic and electrical specifications.
Protection block elements
The proper protection elements must be installed in the protection blocks of the
Stinger CR enclosure. Install protection elements in the protection blocks as follows:
■
Pairs supplying power—Avaya 3B1EW 5-pin gas protector (Com. code
104410147), or equivalent.
■
All other pairs—Avaya 3C1S 5-pin solid state protector (Com. code 105514756),
or equivalent.
Laser safety
The Lucent Technologies Stinger Compact Remote unit is an FDA/CDRH Class I / IEC
Hazard Level 1 system. Laser circuit packs for use in the Stinger CR are FDA Class I
and IEC Hazard Level 1 devices.
Stinger circuit packs or modules that utilize laser radiation for optical transmission
are Class 1 Optical Fiber Telecommunications laser products that comply with
FDA/CDRH21 CFR 1040.10 and 1040.11. They meet the safety measures specified in
the United States Food and Drug Administrations’ Center for Devices and
Radiological Health (FDA/CDRH) regulations and international standards IEC-60825
or DIN/EN 60825.
Potential dangers
Beware of the following potential sources of danger, that will remain despite all
safety measures.
■
Laser radiation from optical transmission systems is in a wavelength that is
invisible to the human eye.
Table D-1.
Stinger electronic and electrical specifications
Application
Specification
Input voltage
±190Vdc (must be from an Argus CSM36-BC
power supply)
or
Native -48Vdc
Input power
260 watts (W) maximum
Connection
5-pair wire stub
Certification
Telcordia GR-487-CORE
Telcordia GR-1089-CORE, Issue 3, October 2002
EMI compliance
FCC Part 15 Class A
ICES 003 Class A