6-12
The Stinger® Compact Remote ATM DSLAM Getting Started Guide
Hosted System Management
Monitoring the status of remote shelves
Enabling remote shelf watchdog warning traps
To enable the system to send traps related to sensors on remote shelves, the following
parameters must be set to
yes
(their default value):
[in TRAP/""]
remote-shelf-enabled = yes
watchdog-warning-enabled = yes
Remote shelf
watchdog
profiles are created and deleted on the host depending on the
operational state of the
remote-shelf-stat
profile for that shelf. These profiles are
indexed using the
shelf-number
x
1000
+ the unit value on the remote shelf. For
example,
4001 = 4 x 1000 + 1
.
For example:
HOST>
dir watchdog
31 11/05/2003 21:29:06 { fan fantray 1 }
31 11/05/2003 21:29:06 { fan fantray 2 }
31 11/05/2003 21:29:06 { fan fantray 3 }
24 11/06/2003 00:22:27 { fan fantray 4001 }
33 11/06/2003 00:24:08 { relay cm-input-relay 4001 }
33 11/06/2003 00:22:27 { relay cm-input-relay 4002 }
33 11/06/2003 00:22:27 { relay cm-input-relay 4003 }
33 11/06/2003 00:22:27 { relay cm-input-relay 4004 }
33 11/06/2003 00:22:27 { relay cm-input-relay 4005 }
33 11/06/2003 00:22:27 { relay cm-input-relay 4006 }
33 11/06/2003 00:22:27 { relay cm-input-relay 4007 }
37 11/05/2003 21:29:07 { cbus shelf-controller 0 }
40 11/06/2003 00:22:27 { over-temperature cm-input-relay 4001 }
34 11/06/2003 00:22:27 { external-fan cm-input-relay 4001 }
26 11/06/2003 00:22:27 { door cm-input-relay 4001 }
The next commands configure a
trap
profile to support these watchdog warnings on
a remote shelf, to be sent to an SNMP station at IP address 10.10.10.1:
HOST>
new trap 10.10.10.1
HOST>
set host-address = 10.10.10.1
HOST>
set alarm-enabled = yes
HOST>
set remote-shelf-enabled = yes
HOST>
set watchdog-warning-enabled = yes
HOST>
write -f