Hosted System Management
Monitoring the status of remote shelves
The Stinger® Compact Remote ATM DSLAM Getting Started Guide
6-7
Using the
remoteshelf
command
A new
remoteshelf
command displays information about enabled remote shelves. It
uses the following syntax on a hosted system:
HOST>
help remoteshelf
usage: remoteShelf -[s|o] <param>
remoteShelf with no options, show all configured remote shelves
remoteShelf -s <shelf> show detailed information for a single remote shelf
remoteShelf -o <slot> show all remote shelves associated with a given OLIM
slot
For example, the following command shows details about remote shelf 2:
HOST>
remoteshelf -s 2
Shelf: 2
Shelf Name: Z0WISAAASCR
Shelf Location: ZoowieIsland-Saskatchewan
Shelf Type: 3 slot Compact Remote
Host Port: {{ 1 5 2 } 0 }
Admin State: Enabled
Oper State: OPER_Down
Up Count: 0
Last Up Time: Tue Sep 16 10:08:51 2003
Last down Time: Tue Sep 16 10:08:45 2003
If you specify a nonexistent shelf number, the host returns the information that the
shelf does not exist in the hosted system. For example:
HOST>
remoteshelf -s 5
Remote shelf 5 does NOT exist!
The following command shows which shelves are connected to an OLIM in slot 5:
HOST>
remoteshelf -o 5
Shelf Name AdminState OperState host-port up-count
id-valid
Indicates whether the
validation-id
setting in the
remote-shelf-config
profile matches the validation ID
specified by the remote shelf’s DIP-switch setting.
The
disabled
value indicates that no validation was
performed. A
true
setting indicates that validation was
done, and the software validation ID setting matched
the DIP switch setting. A
false
setting indicates that
validation was done, and the software validation ID
setting did not match the DIP switch setting.
validation-id-
setting
The physical validation ID set by DIP switches on the
remote shelf (from 0 to 255). This value is read from
the remote shelf.
validation-id
The validation ID specified in the
remote-shelf-config
profile. This value is compared against the
validation-
id-setting
from the remote shelf to determine the
validation result, which is shown in the
id-valid
field.
Parameter
Setting