Lucent Technologies Stinger Compact Remote, Getting Started Manual, Page: 140 / 182

A-2 The Stinger® Compact Remote ATM DSLAM Getting Started Guide
Intended Use
IP2000 interfaces
– Direct connection
– 8 data bits
– No parity
– 1 stop bit
– No flow control
■
A DB-9 female connector for alarm monitoring connections.
■
A duplex LC connector for optical connection.
IP2000 interfaces
The IP2000 is equipped with the following interfaces:
■
A DB-9 female connector for an RS-232 serial connection, with the following
default settings:
– 9600bps
– Direct connection
– 8 data bits
– No parity
– 1 stop bit
– No flow control
■
A DB-9 female connector for alarm monitoring connections (revision 2 control
modules).
■
An RJ-45 connector for a 10/100BaseT Ethernet connection.
■
An RJ-11 connector for the optional internal modem.
■
A PCMCIA interface, designed to accept PCMCIA flash-memory cards. Other
PCMCIA devices are not supported.
■
A duplex LC connector for optical connection.
Control module interfaces
The control module is equipped with the following interfaces:
■
A DB-9 female connector for an RS-232 serial connection, with the following
default settings:
– 9600bps
– Direct connection
– 8 data bits
– No parity
– 1 stop bit
– No flow control
■
A DB-9 female connector for alarm monitoring connections (revision 2 control
modules).
■
An RJ-45 connector for a 10/100BaseT Ethernet connection.
■
An RJ-11 connector for the optional internal modem.