About This Guide
The Stinger® Compact Remote ATM DSLAM Getting Started Guide
xvii
Stinger documentation set
The Stinger documentation set consists of the following manuals, which can be found
at
http://www.lucent.com/support
and
http://www.lucentdocs.com/ins
:
■
Read me first:
–
Edge Access and Broadband Access Safety and Compliance Guide
. Contains
important safety instructions and country-specific information that you must
read before installing a Stinger unit.
–
TAOS Command-Line Interface Guide
. Introduces the TAOS command-line
environment and shows you how to use the command-line interface
effectively. This guide describes keyboard shortcuts and introduces
commands, security levels, profile structure, and parameter types.
■
Installation and basic configuration:
–
Getting Started Guide
for your unit. Shows how to install your Stinger chassis
and hardware. This guide shows you how to use the command-line interface
to configure and verify IP access and basic access security on the unit.
The Getting Started Guides for Stinger models with redundant control
modules describe configuration of this feature.
–
The
Stinger MRT Getting Started Guide
describes the features and basic
configuration of the trunk modules that are specific to a Stinger MRT.
–
Module guides for each type of module designed for the Stinger FS, Stinger
FS+, Stinger LS, Stinger RT, Stinger CR, or Stinger MS+ an individual guide
describes the module's features and provides instructions for configuring the
module and verifying its status.
Press Enter
Means press the Enter or Return key or its equivalent on your
computer.
Note
Introduces important additional information.
Caution
Warns that a failure to follow the recommended procedure
could result in loss of data or damage to equipment.
Warning
Warns that a failure to take appropriate safety precautions
could result in physical injury.
Warning
Warns of danger of electric shock.
Convention
Meaning