Setting Up and Testing the MAX Hardware
Interpreting the MAX indicator lights
MAX 3000 Installation and Basic Configuration Guide
2-9
Figure 2-2. Location of the LAN/UTP and E1 ports on a MAX 3000 E1 model
The maximum distance between the E1/PRI WAN interface equipment and the MAX should
not introduce attenuation of more than 6 dB, when measured at half the maximum data rate
(1024 Kbps). Also, the cable must have a root F characteristic.
Before you power on the MAX, familiarize yourself with the indicator lights. (See
“Interpreting the MAX indicator lights” on page 2-9.)
Interpreting the MAX indicator lights
Before you power on the MAX, familiarize yourself with the indicator lights on the front and
back panels of the MAX.
MAX front-panel lights
Figure 2-3 shows the location of lights on the MAX front panel.
Figure 2-3. Location of MAX front-panel lights
LAN/UTP port
E1 ports
Power
Fault Data Alarm
