MAX 3000 Installation and Basic Configuration Guide
A-1
A
Provisioning the Switch
The switch through which the MAX provides Wide Area Network (WAN) connections must
be provisioned for your MAX and a particular type of access. You must obtain information
from, and provide information to, your WAN provider.
Provisioning the switch for T1 access
If you use an inband-signaling line, the T1 circuit at the point-of-presence (POP) must support
the translations listed in Table A-1 for compatibility with the MAX.
Provisioning the switch for T1 access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
Table A-1. T1 access provisioning information
Translation
Optional or required
Two-state Dual-Tone Multifre-
quency (DTMF) dialing
Required.
Outgoing wink start
Required.
Incoming immediate seizure
Optional for a switch.
Does not apply on T1 lines to a PBX.
Incoming wink start
Optional for a switch.
Required on T1 lines to a PBX.
Incoming digits suppressed
Required, except when a PBX is connected
to T1 line supplied by the MAX through
PRI-to-T1 conversion.
Answer supervision
Required.
