Next Steps
Configuring MAX functionality
MAX 3000 Installation and Basic Configuration Guide
7-5
Configuring the MAX as an IPX router
You can use the MAX as an IPX router, linking remote NetWare LANs with the local NetWare
LAN on Ethernet. Table 7-5 shows where to find related information in the MAX
documentation sets.
Configuring the MAX for Frame Relay
To use the MAX as a Frame Relay concentrator or switch, you establish a nailed connection
from a MAX unit to a switch and configure the unit to act as one of the following:
•
A network-to-network interface (NNI) switch
•
A data circuit-terminating equipment (DCE) unit that responds to users
•
A data terminal equipment (DTE) unit that requests services from a switch
Table 7-6 shows where to find related information in the MAX documentation sets.
Table 7-5. Finding information about IPX routing
For information about:
See:
Ascend extensions to standard
IPX
Network Configuration Guide
Configuring and enabling IPX
routing
Network Configuration Guide
IPX filters
Network Configuration Guide and Security Supple-
ment
Monitoring and testing IPX activ-
ity
Administration Guide and MAX Reference
Table 7-6. Finding information about using the MAX as a Frame Relay concentrator
For information about:
See:
Connection and Answer profile
configuration
Network Configuration Guide
Monitoring circuit information,
link-management information,
and connections
Administration Guide
