MAX User Interfaces
Using status windows
MAX 3000 Installation and Basic Configuration Guide
3-25
Session and system status windows
The built-in Ethernet port is assigned slot 4, and the system itself is assigned slot 0. By default,
the third and fourth status windows show active routing sessions on Ethernet and as many as
32 log messages related to the system. For example:
|--------------------| |--------------------|
|40-100 Sessions | |00-200 15:10:34 |
|> 0 Active | |>M31 Line 01 Ch 0 |
|
| | Trunk up
|
| | | slc-lab-236 |
|--------------------| |--------------------|
To display the Sessions window, if it is not already displayed by default, tab to any status
window, then use the arrow keys to access the Ethernet > Sessions window.
To display the System Message Log window, if it is not already displayed by default, tab to any
status window, then use the arrow keys to access the System > Message Log window.
The Sessions window shows the number of active bridging or routing and modem (terminal
server) sessions. When this window is active, you can scroll down to see the name, address, or
CLID of each connected device. Each line starts with a 1-character session-status indicator. For
example, O means online. For terminal-server sessions, the modem number is identified.
The system message log provides up to 32 of the most recent system events. Use an arrow key
to scroll up (previous messages) or down (later messages). The Delete key clears all the
messages in the log.
The message log window is organized as follows:
•
The first line shows the menu number and the time the most recently logged event
occurred.
•
The second line identifies the log entry number (M00-M31) and, if applicable, the line and
channel on which the event occurred.
d
Dialing
First part of the dial string has been sent.Unit is pausing
for the modem to read and process the first part before
sending the second part.
v
Virtual con-
nection
Virtual connection session is active on modem. No call
is yet active.
o
Out of service
in interface
User has disabled the modem from the MAX configu-
ration interface. The modem is unavailable for calls.
O
Out of service
User has disabled the modem from the MAX configu-
ration interface. The modem is unavailable for calls and
a B channel is set to OutOfService.
Table 3-18. Modem-status characters (continued)
Indicator
Mnemonic
Description
