Clarity
Programmer
Operator Manual
Page 131
In this example, buddying is set to 2 and the
intensity has been fanned, so that each pair
of fixtures gets fanned by the same amount.
In this example, buddying is set to 3 and the
intensity has been fanned, so that each trio
of fixtures gets fanned by the same amount.
Subgroups and Buddying can be re-set to 1 by pressing
Reset Grouping
.
21.6.5
Ctrl Tab
The Ctrl tab is available when any suitable fixture tab is selected in the selection sidebar.
Clicking on the
Ctrl
(Control) tab provides easy access to fixture-specific Control functions
(Lamp on, Reset etc) for the selected fixtures. These will typically execute a pre-defined
sequence as defined within the fixture library. The duration of these commands can be set in
the user preferences.
21.6.6
Intensity and Colour Icons
Each fixture has an icon showing its current intensity and colour at the output. The icon's area
varies from all black (0% intensity) through to all white or colour (100% intensity) depending
upon the intensity of the fixture. The colour changes to match the output of the fixture. If the
current programmer is set to
Blind
, the icon shows the fixtures intensity and colour in the
programmer, even though the Programmer does not contribute any intensity to the output.
See
Blind
for more details.
In the above example there are a range of colours and fixture1 is at 0% (black), 2 & 3 are at
25%, 4 & 5 are at 50%, 6 & 7 are at 75% and fixture 8 is at 100%.
21.6.7
Position Icons
Each fixture has an icon with a white dot showing its current position of its beam at the output.
Intensity 50%,
Color Blue
Intensity 100%,
Color yellow
Control Tab
No Intensity
