LONGHORN LHD8003, Installation Manual

Page: 25 / 33

With all conditions satisfied, PGM will output. The PGM under “ Go 10s when line loss, arm away, arm
stay, disarm or siren follow ” is not determined by “ PGM cut-off ” time , while PGM under other situations
will switch to disactivated after PGM cut - off . The PGM cut - off can be set by programming .
To set PGM cut-off:
1. From the main menu, select “ Programming” → “#” → “ System Option” → “ PGM” → “ PGM Cut-off ” “#”.
2. Press “#” to edit with icon indication .
3. Enter a PGM cut-off time(0-300s, 000 means continuous activation)
4. Press “#” to exit when the desired setting is displayed .
Zone Trouble Indication
This option enables you to select whether zone trouble will be indicated in the system trouble list. If this
function is turned off, it will not display.
To set zone trouble indication:
1. From the main menu, select “ Programming” → “ #” → “ System Option” → “ #” → “ Zone Trb. Ind. ” “ #” .
2. Press the navigation key to select “ ON ” or “ OFF ” and confirm with “#”.
3. Press “ ” to exit .
→ “#” →
→
*
AC Power off Delay(M)
The AC Loss Delay is the amount of time that has to elapse before an AC Loss report is sent to the central
station. If AC power is restored before the event message is sent, the event message is cancelled and will
not be sent. You can program an AC Loss Delay to be between 1 and 255 minutes after the system first
senses the AC loss condition. Alternatively you can program a random AC Loss Delay. The AC Restore
message is also sent using the same method described above. AC Restore is reported only if the AC Loss
report was sent. AC loss delay is mainly used when the power is cut off with many AC loss report sending,
which may cease the system.
To set AC loss delay:
1. From the main menu, select “ Programming” → “#” → “ System O ption” → “#” → “ AC Power off Delay ” “#”.
2. Input the delay time(001-255minutes) or 000 for system random setting.
3. Press “#” to finish .
Line Loss Delay
It transmits message to center station while the telephone line is disconnected. While before the message
is sent to the station, and the telephone line recovers connected well, the message will be cancelled. Or if
the message for Line loss is sent to the station successfully before the connection recover, the line recover
message will be also sent.
(M) →
-45- -46-
To set line loss delay:
1. From the main menu, select “ Programming” → “#” → “ System Option” → “#” → “ Line Loss Delay(S) ” “#”.
2. Input the delay time(001-255minutes) or 000 for system random setting.
3. Press “#” to finish .
→
8.3.8.4 Initialization
Initialize All
Init. All means initializing all. The Initialization function clears the entire system and resets factory
defaults, which will recover the control panel ID and delete all phone numbers and wireless devices.
To initialize all:
1. From the main menu, select “ Programming ” → #” → “ Initialization ” → #” → “ Initialize All ” “#”.
2. It will display on LCD “ Init. All? ”, press “#” to confirm , or “*” to exit .
Load Defaults
Loading the system ’ s default program enables you to restore the factory-set programming defaults, which
keeps the control panel ID and will not delete the set phone numbers or wireless devices.
To load defaults:
1. From the main menu, select “ Programming ” → “#” → “ Initialization ” → “#” → “ Load Defaults ” “#”.
2. It will display on LCD “ Load Defaults? ”, press “#” to confirm, or “*” to exit .
“ ““ →
→
PGM Trigger Activated by…… Disactivated……
Zone 16 Alarm
Zone 17 Alarm
Zone 18 Alarm
Zone 19 Alarm
Zone 21 Alarm
Zone 22 Alarm
Zone 30 Alarm
See above
See above
See above
See above
See above
See above
See above
See above
See above
See above
See above
See above
See above
See above
Press 1 & 2 Press 1 & 2
Cut off after PGM period
10s for Line Trb Telephone line supervision trouble Cut-off after 10s
Arm away
Instant Activate
Any arm status change
Arm Stay Instant Activate
Instant Activate
Any arm status change
Any arm status change
Disarm
Siren follow Siren follower Siren follower
Entry/Exit
Active See above See above
See above See above
See above See above
See above See above
See above See above
See above See above
See above See above Perimeter
Panic
Fire
Gas
Tamper
Duress
Activate Until disarm or after PGM cut-off