Set Time/Date
Time and date must be set, or else the event log will be recorded with no time, arm or disarm may not be
realized, or system trouble will happen, voice guide will not work.
To set time and date:
1. From the menu, select “Service”
→
#
.
2. Input
time
and
date
,
ending
with
“#”
.
3. During input, press
“
*
”
to
quit
.
When
finished
,
press
“#”
to
confirm
.
Or
if the time is not input
completely,
but
with
“ ”
ending. It
will
indicate
“Invalid set!” Then
pres
“*”
to
re
-
input
.
Auto Arm/Disarm Time
It enables you to set auto arm/disarm time which is set in 24hr system. Before this, the function of auto arm
/disarm must be turned on.
To set auto arm/disarm time:
1. From the menu, select “Service”
“Auto Arm/Dis.”
,
then
select
one
group of auto
time, ending
with
“
#
”
.
2 Select “Arm Time”
or
“Disarm Time”
,
press
“
#
”
to
enter
,
input
time
,
and press
“
#
”
to
save
.
“
#
”
→
“Set Time/Date”
→
“ ”
#
Note: Time and date must be set, or else the event log will be recorded with no time.
→
“#”
→
8.3.7
Ser vice
Option
2. Press the navigation key to select “ON” or “OFF”
,
ending
with“
#
”
.
3. Press “
*
”
to
quit
when
finsihed
.
1. From the menu, select “Auto Arm/Dis.”→“
#
”→“Auto ON/OFF”→“
#
”.
To turn on/off the function of auto arm/disarm
:
4. Auto ON/OFF
ON
OFF
Siren Call Back
With this function, the siren will beep when you arm or disarm to remind operation success.
To set siren call back:
1. From the menu, select “Service”
→“
#
→“Call back when arm/dis.”→“
#
”
.
2. Press the navigation key to select “ON”
or “OFF
“
#
”
.
3. Press
“*”
to
quit
when
finished
.
” →
Siren test is strongly recommended periodically for safety, which includes wired siren, wireless siren and
built-in siren.
To test siren:
1. From the menu, select “Service”
→
“
#”.
2. Press the navigation key to select
“
Siren Test
”
→
“
#”.
3. Select the type of siren ending with “
#
”
to
test
.
4. After test, press “
#
”
to
continue
another
test
.
Or
“
*
”
to
finish
.
Siren Test
-33-
-34-
Walk Test
It enables you to make sure if the detectors work normally, which is strongly recommended to do
periodically.
To set walk test:
1. From the menu, select “Service”
→“Walk Test”→“ ”
All registered detectors will display on
LCD
with the
voice
guide
as
“
Walk test starts, transmit wireless signal!
”
2. Once the correspondent signal is transmitted, the detector display will disappear on LCD. If it will not
disappear, it indicates trouble occurs.
3. When all detectors disappear out of LCD, the voice will guide “Walk test over !” meanwhile with
“No device
!
” indicating
on
LCD
4. Press
“*”
to
quit
when
test
is
finished
.
→“
#
”
# .
Walk Testing……
,
XXXs
1. WL. Zone 1
2. WL. Zone 2
3. WL. Zone 3
4. WL. Zone 4
Walk test over……
,
XXXs
No
Device
!
It includes TX list(all registered TX and status report), and TX test under this menu.
To query TX list:
1. From the menu, select “Service”
“#
”
.
2. Select “Transmitter” →
“TX list” →
“
#
”
.
3. Then
the
TX
list
will
display
.
Or
if
with no device it will display
correspondently
.
→
,
Transmitter
Note:
The
longest
period
for
walk
test
is
600
s
.
Press“
*
”
to
quit
after
finish
.
Time and date must be set, or else the auto arm or disarm
function
will
be
recorded
with
no
time
.
When GSM module
is disconnected, with no time set, auto arm/diarm function may be not available.
Note
Summary of Contents for LHD8003
Page 2: ...CREATING SECURITY SOLUTION...
