5.1.1 Status LED
5.1.2 Front Panel Keypad
Power LED: Red means AC loss or low battery. Green means normal.
Arm LED: Red means armed. Green means disarm.
Alarm LED: Red means alarm. Slow flash means dialing the CMS.
Signal LED: Flash means normal GSM signal.
Keypad backlight:
press any key, the backlight will turn on, whatever, if no any keying within 30s, it will
disappear. During the backlight from ON to OFF, with any trouble, the control panel will warn “System
trouble, please check!”
5.2 LCD Display
The LCD display provides you with a detailed interface for operation and programming.
5.2.1 Standby Mode
-15-
-16-
standby mode, system status, time and date, or
banner are displayed on LCD. If system status is
abnormal, it will displayed as:
Arm Away
2 0 / 1 2 / 2 0 1 0
15:30
System Trb.
5.2.2 Display Interface
You may meet following symbols or marks:
Selected for multiple-choice
Unselected for multiple-choice
Selected for single choice
Unselected for single choice
Counting down
System trouble
Display of alarm events
Alarm List
System Trb.
Trb. List
Display of trouble
It means not disarmed after alarm.
Untreated
It means disarmed after alarm.
Treated
Arm Away
2 0 / 1 2 / 2 0 1 0
15:30
System Trb.
2. Line Loss
3. Low GSM Signal
4.WL. Zone 1 Trb.>>>
1. Low
Battery
------ Trb. List------
For arm away
For arm stay
For disarm, and also for fire alarm(press for 2s)
For programming, and also for panic alarm(press for 2s)
Figure or navigation key for up turn, for menu operation or query
Figure or navigation key for down turn, for menu operation or query
It means
“
delete
”
while
inputting
figures
or
quit
for
menu
operation
.
AWAY
STAY
DISARM
PROG
Confirm to enter for details
System Trouble Display:
“System Trb.” will display on LCD if there is. See following, press to query:
Standby mode can be defined as the state the system is in when it is disarmed and not in menu mode. In
Summary of Contents for LHD8003
Page 2: ...CREATING SECURITY SOLUTION...
