For detailed system trouble and solution, please refer to following table:
Description
Solutions
Low Battery
Low power of battery
Check the power connection timely.
Line Loss
Disconnection of telephone line
Check the line connection carefully
Low GSM signal
Weak signal of GSM communication
Choose a better position for installation
Wireless
Trouble
Low Battery
Transm itter Loss
Low power of transmitters
Change battery
No signal is received during supervision period. Check if the transmitter is moved or broken
Wired Trouble
Wired devices are triggered.
Check if the wired devices are normal working or not.
Power is cut off.
Check the power connection timely.
No GSM module
Disconnection of GSM module due to
abnormal power.
Please cut off the power and re-connect.
AC failure
Please re-ins ert the card after re-p owering off the system
No GSM signal
No signal received from mobile phone
SIM card is invalid; Or re-choose a suitable position
for installation.
Time Unset
No SIM card
Loose contact of SIM card
System time is set incorrectly.
Re-set the system correctly
CMS 1 Trouble Failed communication to CMS1
Note CMS 1 or relatives to check
CMS 2 Trouble Failed communication to CMS1
Note CMS 2 or relatives to check
SMS Trouble
Failure of SMS send
Check if there is no balance for SIM card
Dialling Trouble
1. Refuse or power off of receiving phone
2. Overdue of the SIM card
Pick up the phone in time.
Check if there is no balance for SIM card
Commu-
nication
Trouble
Trouble
There are 8 types of zones: entry/exit zone, active zone, perimeter zone, panic zone, fire zone, gas zone,
tamper zone and duress zone.
There are 22 zones: zone 1-16 is for wireless. Zone 17 is for panic. Zone 18 is for duress. Zone 19 is for
fire. Zone 21-22 is wired. Zone 20 is for tamper.
Different zone type alarms in different ways.
Tamper alarm is valid with 24 hours for wireless zone 1-16. with tamper alarm indication.
Chapter 6: Zone Descriptions
-21-
-22-
6.1 Zone Type
Zone
Type
Valid or not
when disarm
Valid or not
when away
Valid or not
when stay
Exit
Delay
Entry
Delay
Sound
and flash
Type
number
Entry/Exit Zone
Active Zone
Perimeter Zone
Panic Zone
Fire Zone
Gas Zone
Tamper Zone
Duress Zone
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Valid
Mount position
or detector
Gate
Indoor
Veranda window
Panic button
Fire detector
Gas detector
Tamper switch
Emergency button
6.2 Zone Number
Zone Number
Bypass or not
Type
Remark
Applicable
Applicable
Applicable
Applicable
Applicable
Applicable
N/A
N/A
N/A
N/A
N/A
N/A
01~16 is wireless
17 is panic
18 is duress
19 is fire emergency
21~22 is wired
30 is panel tamper
6.3 Chime Zone
It enables the panel with alarm with entry delay during arm, or issue “ Welcome to intelligent alarm system!”
under disarm.
Note : The chime zone function only works for entry/exit zone.
.
.
.
.
.
.
.
.
.
Summary of Contents for LHD8003
Page 2: ...CREATING SECURITY SOLUTION...
