Chapter 8: Programming
8.1 Access Programming
1. During disarm, press “PROG”
on
keypad
,
and
the
voice
will
remind
to
input
code, “Enter pass
-word before setting parameters!
Enter Menu, input code:
2. Input
master
code
or
installer
code
to
enter
main
menu
as
following
:
1. Cancel Alarm
2. Stop. Comm.
3. Code Set
4. Zone Bypass
5. Phone Set
6. Event Log
Menu
3. Press the navigation key to select what you desire to set and confirm with “
#
”
,
or press
“
*
” to exit
.
1 .
“Programming”
option
is
only
available
with
installer
code
.
2 .
means
selected
,
means
unselected
.
3 .
During
programming
,
the
zone
will
not
alarm
when
it
is
triggered
Note
8.2 Quit Programming
8.3 Programming
8.3.1 Cancel Alarm
With faulty operation or unexpected alarm occurs, user can “Cancel Alarm” in
the menu. Thus the panel
will issue a event cancel to CMS
.
To cancel alarm:
1. From the menu, select “Cancel Alarm”
“ ”
.
2. The
LCD
will
remind
“Cancel Alarm ”.
3. Press
“
*
”
to
return or
“ ”
for
confirm
.
→
?
#
#
Press “
*
”
to quit
programming to previous menu. Or it
will return to previous automatically with no
operation
within 1 minute
.
-27-
-28-
Through this operation, all communication buffers are cleared and all pending messages are cancelled.
8.3.2
Stop
Communication
To stop communication:
1. From the menu, select “Stop. Comm.”
“ ”
.
2. The LCD will remind you if to stop or not, press “
*
”
to
cancel
the
operation
,
or
“ ”
to
stop
it
.
→
#
#
Code is available as 4-6 digits. If the code is set 5 or 6 digits, the last one can not be 0. The code must be
different.
Master Code Set:
The master code is the highest authorization level. It enables you to enter main menu, which can be edited.
With the Master code, you can edit all other user codes except the installer code.
To set master code:
1. From the menu, select “ Code Set”
"#”
"
.
2. Input the old master code ending with “ ”
.
3. Input the new master code you desire to set ending with “ ”
.
4. Re-input the new master code again, confirm with “ ”
The LCD will remind if it is edited or not.
Press
to exit or “#” to finish
.
“
*
”
→
→
→
"
Master C
ode
"#
#
#
#
8.3.3
Code
Set
1. Master Code
1. Old Master Code
2. New Code(4-6 bits)
3. New Code Confirm
Summary of Contents for LHD8003
Page 2: ...CREATING SECURITY SOLUTION...
