5
5831 Series
Installation and Operating Instructions
Copyright © 2021, ASSA ABLOY Australia Pty Limited. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Australia Pty Limited is prohibited.
700002AU Rev 2 06/21
Pull Side
Push Side
Left Hand
PULL
Right Hand
PULL
Figure 1
Before You Begin
Hinge
Hinge
Left Handed
Door Opening
Direction
Left Handed
Door Opening
Direction
PULL SIDE
PUSH SIDE
• All dimensions are given in metric (or inches) .
DO NOT scale drawings .
• When using a plug-in 24VDC power supply,
make sure a 230VAC grounded power outlet is
available in vicinity of door .
• Set up a protective barrier (caution/warning
tape) to prevent unauthorized access to work
area .
• If applicable, remove existing door closer .
• Make sure doors and frames are in good working
order without sticking or binding .
• Make sure door has been secured to prevent
unexpected opening or closing during
installation .
Push Side Mount:
ALWAYS install operator on
inside (push-to-open) of door at hinge or pivot
edge of top rail .
Pull Side Mount:
ALWAYS install operator on
outside (pull-to-open) of door .
1 . Determine door handing . (Figure 1)
2 . Determine if installation is push side mount
or pull side mount . (Figure 2)
• If push side, go to page 6 .
• If pull side, go to page 11 .
Determine Door Handing and Mounting Type
Figure 2
