Copyright © 2021, ASSA ABLOY Australia Pty Limited. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Australia Pty Limited is prohibited.
700002AU Rev 2 06/21
12
5831 Series
Installation and Operating Instructions
Install Operator Mounting Bracket and Cover
PULL SIDE Operator and Arm Installation
1 . Install operator mounting bracket to door into
holes marked in “Prepare Frame and Door”
section on page 11 . (Figure 20)
If door is aluminum:
a . Use 25/64" bit to drill operator mounting
bracket holes into locations previously
marked on door .
b . Using provided rivnut installation tool,
install bracket to door with minimum four
(4) ¼-20 steel rivnuts .
DO NOT TIGHTEN
If door is wood or hollow metal:
a . Use 3/8" bit to drill operator mounting
bracket holes into locations previously
marked on door .
b . Using 3/16" hex wrench, install bracket to
door with minimum four (4) ¼-20 socket
head cap screws and washers .
DO NOT TIGHTEN
NOTE:
For light duty or hollow core doors
with insufficient top rail blocking, supplied
through bolts or sex nut and bolts are
required .
2 . Using slot holes, position mounting bracket so
there is 16mm between top of bracket and top of
door then tighten screws to secure . (Figure 21)
1 . Install operator mounting pins into top holes of
bracket using a large adjustable wrench .
(Figure 22)
2 . Install operator mounting bracket cover by
placing it over pins . (Figure 22)
3 . Remove bottom cover of operator . (Figure 23)
4 . Remove battery pack from operator by sliding it
off T channel . (Figure 23)
5 . Insert two (2) ¼-20 x 38mm socket head cap
screws into operator . (Figure 23)
6 . With battery pack side toward door hinges,
slide operator onto operator mounting pins and
tighten screws .
Mount Operator to Bracket
16mm
Top of Door
Figure 20
Operator
Mounting
Bracket Cover
Operator
Mounting Pin (2)
Top Position
for Pull Side
Installation
Hinge Side of Door
Bottom
Cover
Mounting Screw Locations
Operator
T Channel
Battery Pack
Location
Figure 21
Figure 22
Figure 23
or
or
