34
LNC woodworking Machine Series Operation Manual
寶元數控
LNC Technology Co., Ltd.
Parameter
No.
Parameter Content
8070
Inspection form of the first spindle up and down in-place (0: no
inspection, 1: up in-place, 2: down in-place, 3: up and down
in-place)
8071
Inspection form of the second spindle up and down in-place (0: no
inspection, 1: up in-place, 2: down in-place, 3: up and down
in-place)
8072
Inspection form of the third spindle up and down in-place (0: no
inspection, 1: up in-place, 2: down in-place, 3: up and down
in-place)
8073
Inspection form of the forth spindle up and down in-place (0: no
inspection, 1: up in-place, 2: down in-place, 3: up and down
in-place)
3. The M-code setting of spindle cylinder related is located in the M-code setting in the user
parameters.
Parameter
No.
M-code Content
Default Value
9424
[M-code Setting] First spindle up
26
9425
[M-code Setting] First spindle down
25
9426
[M-code Setting] Second spindle up
41
9427
[M-code Setting] Second spindle down 40
9434
[M-code Setting] Third spindle up
43
9435
[M-code Setting] Third spindle down
42
9436
[M-code Setting] Forth spindle up
45
9437
[M-code Setting] Forth spindle down
44
4.2.3.
Spindle Suction Hood
1.
The system provides the function of judging whether the inspection is in-place when using
the spindle suction hood. If there is no inspection mechanism, the function can be turned off
by parameters.
2.
The parameter setting is located in the system value in the user parameters.
Parameter
No.
Parameter Content
8320
Spindle 1 suction hood up and down in-place inspection (0: no
inspection, 1: up in-place, 2: down in-place, 3: up and down
in-place)
