23
LNC woodworking Machine Series Operation Manual
寶元數控
LNC Technology Co., Ltd.
Funtion is enable.
Automatic Tool Setting
3.5.
Function Path: Compensation Group > Automatic Tool Setting
1. The automatic tool setting function provides three tool setting modes as follows:
Single-tool single workpiece: only one tool and one workpiece are processed during
machining.
Single-tool multi-tasking workpiece: Only one tool is used for machining, but there are
different machining workpieces.
Multi-tool multi-tasking workpiece: tool change will be carried out during machining, and
there will be a variety of different machining workpieces. Generally, woodworking
machines are of this type.
2. Multi-tool multi-tasking tool-setting steps
：
i.
Perform the tool-setting first (press the tool-setting on the screen to start).
ii.
The tool-setting operation is started for the parameters set on the screen.
iii.
Manually move the tool to the workpiece surface (or the machining platform) after the
tool-setting is completed.
iv.
Set the Z drop (press the Z drop on the screen, only the first tool needs to be set).
3. Note
：
i.
The Z drop of the first tool must be set, and the user can modify the coordinate system of
the Z drop (The preset is G54).
ii.
It is not necessary to set the Z drop from the second tool, and only the tool-setting action
is required.
