16
LNC woodworking Machine Series Operation Manual
寶元數控
LNC Technology Co., Ltd.
Breakpoint Re-start
3.2.
Function Path: Monitoring Group > Program Re-start
1. The breakpoint re-start function is divided into 5 ways to search for the restarting point.
i.
Line number search: Search for the breakpoint based on the line number of the
machining program entered by the user.
ii.
Number search: The tool breakpoint search is performed according to the machining
program N number input by the user.
iii.
Breakline search: The breakpoint search is performed according to the breakpoint
recorded by the system.
iv.
M code search: The breakpoint search is performed according to the M code input by
the user.
v.
T code search: The breakpoint search is performed according to the T code input by the
user.
2. After searching for the specified position, press the
start machining
to start the breakpoint
position recovery action, and the system will move to the top of the breakpoint.
