32
LNC woodworking Machine Series Operation Manual
寶元數控
LNC Technology Co., Ltd.
8341
[Loading function] Loading cylinder up and down in-place to check (0: no
check, 1: up in-place, 2: down in-place, 3: up and down in-place)
8342
[Loading function] Loading and unloading in-place to check (0: no
inspection, 1: loading inspection, 2: uploading inspection, 3: loading and
uploading inspection)
6. Note
：
When using the one-key operation function, you need to select the relevant function in
the
optional function buttons
, as shown below.
Spindle Function
4.2.
4.2.1.
Spindle speed correlation
1. The system provides the judgment method of the spindle speed arrival and zero speed arrival.
The parameter setting method can be used to select the method of calculating the number of
seconds or the system spindle speed arrival and zero speed arrival can be notified by using
the external signal.
2. The parameter setting is located in the system value of the user parameters.
Parameter
No.
Parameter Content
8312
Waiting time for arrival of first spindle speed (seconds, -1:
external signal notification)
8313
Waiting time for arrival of second spindle speed
(seconds, -1: external signal notification)
8314
Waiting time for arrival of third spindle speed (seconds,
-1: external signal notification)
8315
Waiting time for arrival of forth spindle speed (seconds,
-1: external signal notification)
8343
[Spindle function] Waiting time for arrival of zero speed of
