12
LNC woodworking Machine Series Operation Manual
寶元數控
LNC Technology Co., Ltd.
Maintenance Group
2.5.
This group is mainly used to set system parameters, system backup, system upgrade, IO point
setting, network setting, language setting and quick restore. All buttons in this group are listed
below:
User parameters: Set the relevant parameters of the PLC writing function. For detailed
instructions, please refer to 5.1.
Network setting: Set the IP related information for the system to connect with external
devices.
Identity change: User level change, the password of level 3 defaults to 7777.
Hardware Contact: Set the corresponding address of the system and I/O board card and
display the current I/O usage status.
※
This button needs to be switched to level 5 to appear.
Parameters: Set the system built-in standard parameters, such as: processing effect
debugging, hardware usage, axial motion function, etc., please refer to 5.2 for detailed
instructions.
Backup: Perform system data backup operation. For details, please refer to 3.7.
System update: Perform system software version update operation. For details, please refer
to 3.8.
Quick Restore: Perform quick backup and quick restore of system data. For detailed
instructions, please refer to 3.9.
※
This button needs to be switched to level 5 to appear.
Service life: Set up and cancel the installment of the machinery factory and the agent.
Language setting: Switch the language system. For details, please refer to 3.10.
Password change: User level password modification.
Version information: View the software version number and version information used in the
current system.
