17
LNC woodworking Machine Series Operation Manual
寶元數控
LNC Technology Co., Ltd.
3. The height above the breakpoint is set by user parameter 8052.
4. After moving to the top of the breakpoint, machining startup is pressed again, and the
program processing will start.
5. Note
：
i.
Before using the breakpoint to restart, it must be confirmed that the machine has
returned to the origin, otherwise the function will not take effect (the set breakpoint
cannot be found).
ii.
When restarting with a breakpoint, it's required to switch the operating mode to
automatic (MEM) mode.
