18
LNC woodworking Machine Series Operation Manual
寶元數控
LNC Technology Co., Ltd.
File Management
3.3.
Function Path: Edit Group > File Management
This function is used to manage the machining procedures in the system, which mainly divided
into three parts.
3.3.1.
Delete / rename / copy / select all / cancel select all
-
Delete: Used to delete the machining program owned by the system. There are three ways to
select files: single selection, multiple selection and select all.
-
Rename: Rename the file name of the selected program in the system.
-
Copy: Copy the selected machining program into a new file, and the new machining program
needs to be named during the copying process.
-
Select All: Select all machining programs in the system.
-
Deselect All: Cancels all selected machining programs.
3.3.2.
U-disk import / export
i.
After the user inserts the U-disk into the USB port of the system, the U-disk internal
processing program is imported into the system through the U-disk import and export
function, or the processing program in the computer is exported to the U-disk.
ii.
As shown in the figure below, the left side of the screen is all the machining programs in the
system, and the right side is all the machining programs in the folder selected in the U disk.
。
※
Note: Folder import only supports one level, like : Test/
