21
LNC woodworking Machine Series Operation Manual
寶元數控
LNC Technology Co., Ltd.
-
Not use the scheduling: Do not use this function.
-
Manual Start: When use scheduling machining function, the system will automatically open the next
processing program in the schedule, after each execution of the processing program. But the use must
manually press to start processing.
-
Auto. Start: When use the scheduling machining function, the system will automatically open the next
processing program in the schedule and automatically start processing, after each execution of the
processing program. It would not stop processing until the user presses reset or program pause.
3.
Click any number in the schedule list to open the program and start scheduling from the number.
3.4.2.
Project version
1.
Scheduling machining screen is dividing into upper screen and down screen, the upper screen
display the current machining program content, coordinate and drawing pre-view. The down screen
display all processing program and function of the ongoing schedule.
2.
There are three startup modes of scheduling machining, the introduction as below:
-
Do not use: Do not use the scheduling machining function.
-
Manual Start: When use scheduling machining function, the system will automatically open the next
processing program in the schedule, after each execution of the processing program. But the use must
manually press to start processing.
-
Auto. Start: When use the scheduling machining function, the system will automatically open the next
processing program in the schedule and automatically start processing, after each execution of the
processing program. It would not stop processing until the user presses reset or program pause.
3.
There are five additional action of the scheduling machining, the introduction as below:
-
No action: Only process the scheduling machining program content.
-
Feeding: Processing feeding, before processing scheduling machining.
-
Blanking: Processing blanking, before processing scheduling machining.
-
Feeding & Blanking: Including feeding and blanking.
-
Not processed: Do not process this function.
