27
LNC woodworking Machine Series Operation Manual
寶元數控
LNC Technology Co., Ltd.
Backup
3.7.
Function Path: Maintenance Group > Backup
1. Use U-disk for system backup and restore actions:
i.
Backup: After inserting the USB flash drive, check
the export to USB
, select
all data
backup
, press the
transfer
and select the U-disk folder. After selecting it, press
OK
to
start the backup and wait for a few seconds until the system prompts the transfer to
complete. After the backup is completed, the backup folder will appear, and the files
inside will be the backup files.
ii.
Restore: After inserting the USB-disk, check the
USB import
, select
the upper layer
folder where the backup folder is placed in the USB-disk, and press the
transfer
to start
restoring the system data after the selection. After the restoring is complete, you must
restart the system to restore the original backup state.
2. Note
：
This feature must be performed after an emergency stop has been pressed to prevent
the machine from unpredictable conditions during the backup process.
