LK Floor Heating | Assembly Instructions | LK Room Temperature Control ICS-RF8
12
EN.33.C.891008
Description of display
1. Heat on/off and minimum and maximum limit
2. Number of the receiver unit and error code
3. Room temperature measurements enabled
4. OK symbol
5. Indicates constantly disconnected weekly program
6. Temperature indicator
7. Setup menu
8. Holiday function
9. OFF/ON selection
10. Local/general set-up
11. Control channel/day
12. Operation
13. Key lock symbol
14. Communication symbol
15. Battery indicator
Description of the thermostat menus/settings
LK ICS-RF can be adjusted and set up as following:
Checking signal strength
Before the system is put into operation for the first time the signal strength should be checked so that all
thermostats are located within "broadcasting" area.
Check signal strength as follows: