LK Floor Heating | Assembly Instructions | LK Room Temperature Control ICS-RF8
15
EN.33.C.891008
WK04 = stop time comfort/start time eco days 6-7, select the time with the left/right arrow, confirm with
Mode
.
NOTE:
The above settings apply to all the thermostats in the system.
Exceptions are possible by changing the temperature setting
for an “exception area". The time remains the same for all
units, but it is possible to "disconnect" night set-back by
selecting the same temperature day and night for the
"exception area". See also the section
Weekly program –
disconnect the program temporarily
and
Weekly
program – disconnect the program constantly
.
Weekly program - adaptive function
The system has an adaptive function which means that the system learns how slow the room heats and adjusts
the start time so that the temperature reaches the desired "Start Time" (from
Economy
to
Comfort
)
The device comes with "disconnected" adaptive function, the function is activated as follows:
1.
Press
Mode
until
flashes, confirm with
Mode
.
2. 2. Select right arrow until
AdPt
(adaptive) is displayed, confirm using
Mode
.
3. Select
ON/OFF
using the left/right arrow, confirm using Mode.
The function starts at the next change from
Economy
to
Comfort.
NOTE:
The above programming applies only to that specific room
thermostat.
Weekly program – disconnect the program temporarily
If required the weekly program can be disconnected on any thermostat separately.
The weekly program can be temporarily disabled as follows:
1. Increase/decrease the temperature by +/- key.
2. The temperature starts to flash.
3. When the temperature has stopped flashing, the temporary increase/decrease is activated.
4. The display shows neither
Comfort
nor
Economy
as the temporary increase/decrease is activated.
The temporary disconnection of the weekly program disappears when the program switches between
Economy/
Comfort
next time.
Alternatively, you can press
Mode
for 4 seconds to return to the weekly program.
Weekly program – disconnect the program constantly
If you wish, you can disconnect the weekly program constantly for any thermostat.
The weekly program is disconnected permanently as follows:
