Note
To use the
USB
interface, the graphical user interface
GUI d-LISTconfig
is required. More detailed in-
formation are available in the operating manual
60T340
.
Important note
The
USB
interface is
not
intended for permanent connection with the graphical user interface
GUI
d-LISTconfig
.
6.10
Ethernet interface (LAN)
The Ethernet interface can be used for direct connection to a
PC
for maintenance and analysis purposes and for
creation/modification of the unit configuration (→ 3.19).
IP address
Subnet mask
Gateway
MAC address
Factory default
192.168.1.1
255.255.255.0
192.168.1.247
BC-97-40-xx-xx-xx
Table 29: Factory default Ethernet interface
Description MAC address:
BC-97-40-xx-xx-xx
=
BC-97-40
→ LISTEC GmbH /
xx-xx-xx
→ individual, unique.
The required network settings can be changed according to the project requirements using the configuration
wizard
of the
GUI d-LISTconfig
.
Standard MODBUS
TCP
Port
502
(adjustable)
Standard
d-LISTconfig
TCP
Port
501
(adjustable)
Table 30: Standard
TCP
Ports
Note
To use the
LAN
interface, the graphical user interface
GUI d-LISTconfig
is required. More detailed in-
formation are available in the operating manual
60T340
.
6.11
Micro-SD card
It is possible to store data on a
Micro-SD card
. All log files can be swapped out from the external flash (event
memory, life cycle entries, differential temperature as well as maximum temperature).
60T328-02-LI-en / 29.01.2021
LISTEC GmbH
Page 59/112
Fig. 119: Ethernet interface (
LAN
)
Fig. 120:
Micro-SD card
