Instructions for use
SCU 835 / SEC 15
5.5.3
Opening the SECcon 15 plug connector
Procedure for opening the plug connector:
Press a flat screwdriver with
cutting
edge DIN 5264 A, 3.5mm ground
onto
the release. Then pull the connection
apart.
Press the spring force clamps into the release slot with a flat screwdriver with
cutting edge DIN 5264 A,
3.5mm ground
. Then pull out the corresponding wire of the
CC 15
connection cable.
All assembly drawings of the plug connectors RST
®
with kind permission of Wieland Electric GmbH (www.wieland-electric.com).
6
Connections and settings SCU 835
Note
In the following, the individual connections on the mainboard
MB SCI 835
and the relay board
REL 835
are described. For this purpose separate pictures are used for each subitem, where only the relevant
components are shown. All non-relevant components are hidden. Descriptions of the
MB SCI 835
are
identical with the replacement mainboard
MB SCU 835
.
Page 48/112
LISTEC GmbH
60T328-02-LI-en / 29.01.2021
Fig. 84: Open the plug connector
SECcon 15
Fig. 86: Pull out wires
Fig. 85: Unlocking the wires
-
Fig. 87: Mainboard
MB SCI 835
Fig. 88: Relay board
REL 835
