Lissmac MULTICUT 550 GH, Operating Manual

Page: 70 / 92

70/92
10. WARRANTY
The warranty for this machine is 12 months. For the wear parts listed in the following, warranty is only granted
if the wear is not due to operation.
Wear parts are those parts, which are subject to an operational wear with an intended use of the machines. The
wear time cannot be defined in a uniform manner, it differs according to the usage intensity. The wear parts
must be maintained, adjusted and if necessary exchanged in a device-specific manner according to the operating
manual of the manufacturer.
Operational wear does not presuppose any claims for defects.
•
Feed and drive elements such as racks, gear wheels, pinions, spindles, spindle nuts, spindle bearings,
ropes, chains, chain wheels, belts
•
Seals, cables, hoses, collars, plugs, clutches. Water, pneumatic or hydraulic valves and electric
switches
• Guide elements such as guide bars, guide bushes, guide rails, rollers, bearings, slide protection
supports
•
Clamping elements of fast separating systems
•
Rinsing head seals
•
Slide and rolling bearings which do not run in the oil bath
•
Shaft seals and sealing elements
•
Friction and overload clutches, brakes
•
Carbon brushes, collectors
•
Quick-release rings
•
Control potentiometer and manual logic elements
•
Fuses and lights
•
Auxiliary and operating materials
•
Fastening elements such as wall plugs, anchors and screws
•
Bowden cables
• Fins
•
Diaphragms
• Spark plugs, glow plugs
• Parts of the reversing starter such as the starter cord, starter pawl, starter reel, starter spring
• Sealing brushes, sealing rubber, splash guard cloths
• Filters of all types
•
Drive, deflection rollers and bandages
• Run and drive wheels
•
Water pumps
•
Drill, separation and cutting tools
•
Needle felt protection
•
Energy storage devices