Lissmac MULTICUT 550 GH, Operating Manual

Page: 7 / 92

7/92
OPERATING MANUAL
Preface This operating manual is designed to make it easy to familiarize yourself with the machine and use it
for its intended purpose.
The operating manual contains important information on how to operate the machine safely, properly
and economically. Compliance with it will help to avoid dangers, repair costs and downtimes and
increase the reliability and service life of the machine.
The operating manual is to be supplemented by instructions due to existing national regulations for
accident prevention and environmental protection.
The operating manual must be available at the location of the machine at all times.
The operating manual must be read and used by everybody who undertakes work on the machine, for
example:
 Operation, including setting, troubleshooting whilst operating, removal of production waste,
care, disposal of media and consumables

Maintenance (servicing, inspection and repair) and/or
 Transport
In addition to the operating manual and the binding regulations for accident prevention which apply in
the user's country and at the place of use, the acknowledged rules for safe and correct working
practice must also be observed.
Tools required
A tool in the form of a saw blade is required for operating the floor saw. These tools can be purchased
from the manufacturer.
Further documents In addition to this operating manual, further documentations from the respective manufacturer of
individual components of the machine are available:
 Internal combustion engine operating manual
LISSMAC does not assume responsibility or liability regarding correctness and completeness of third-
party documentation.
Changes and reservations
We have taken every effort to ensure that this operating manual is correct and up to date. To keep our
technological lead over our competitors, it may be necessary to make modifications to the product and
its operation without prior notice. We cannot accept any liability for faults, failures and resulting
damage.
Target group
These operating instructions are aimed at semi-skilled and trained personnel in the fields of structural
mechanics, concrete cutting technology, road construction, and civil engineering.