Lissmac MULTICUT 550 GH, Operating Manual

Page: 64 / 92

64/92
Oil change sequence
1. Loosen the cover of the expansion tank. (Pos. 1)
2. Unscrew the adapter strip (A).
3. Unscrew the holder for support (B).
4. Unscrew back plate (C).
5. Place the collection container underneath.
6. Open the oil drain plug and drain the oil.
7. Unscrew the oil filter. (Pos. 3)
8. Oil and screw in the seal of the new oil filter.
9. Tighten the filter ¾ by hand.
10. Screw in the oil drain plug again and fill in oil until the expansion tank is half full.

The gearbox must be purged after each oil change.