Lissmac MULTICUT 550 GH, Operating Manual

Page: 38 / 92

38/92
6.2. Warning lights
NOTICE
Heed dashboard warning lights
Warning signals indicate a fault in the engine. To avoid damage to the machine the indicated fault must be
corrected as soon as possible.
Oil level warning lamp
Lights up red with ignition. Goes out a soon as the engine is running.
If signal lights up during operation, the oil level is too low.

Stop engine

Check oil level and replenish as required
(also see engine operating manual for details)
Engine malfunction
If this warning signal indicates a general engine fault if it lights up while the engine is running.

Stop engine
 Check oil level check air filter, check coolant level
(also see engine operating manual for details)
Battery / Alternator malfunction
Lights up with active ignition and goes out when the motor is running.
If signal lights up during operation, the alternator is defective.

Check alternator
Attention : Engine starter and saw arm lift will not work with a drained battery
Fuel level warning
Fuel tank reserve reached

Refuel with Diesel
Maintenance interval reached
 Service machine in a timely manner