Lissmac MULTICUT 550 GH, Operating Manual

Page: 48 / 92

48/92
Cutting
1. Start engine with ignition key (Pos. 1)
2. Adjust cutting shaft speed with engine throttle (Pos. 4)
check shaft RPM in the multifunction display (Pos. 10)
3. Activate water pump by throwing switch (Pos. 2)
4. Lower saw arm via switch (Pos. 7) until saw blade scratches the surface
and zero the depth gauge (Pos. 3)
5. Gradually lower the saw blade via switch (Pos. 7) to the desired cutting depth
6. Adjust lowering speed with throttle valve (Pos. 5) if required
7. Release parking lock with lever (Pos. 9)
8. Engage clutch for traction drive (Pos.8)
9. Initiate feed movement by gradually pushing drive lever forward (Pos. 6)
10. Adjust feed speed to cutting conditions.
11. Monitor cutting parameter on the multifunction display (Pos. 10)
1
4
7
3
5
6
2
9
8
10