Lissmac MULTICUT 550 GH, Operating Manual

Page: 27 / 92

27/92
4.5. Saw blade installation / change (tool)
WARNING
Cut and crush hazard from rotating parts
Rotating saw blade or flange can pull in and sever clothes or body parts.

Switch off the engine and remove the ignition key.

Before working on the machine, all parts must be stationary.
 Secure the machine against restart
Always check saw blades before installation!

Blade for wet cutting? (1)

Blade suitable and approved for cutting work? (5)
 Blade and holder are of the right size? (2) (7)

Permissible cutting speed maintained? (3) (4)

Direction of rotation? (6)

All segments available?

Blade was overheated? (bare steel, blue tarnish = do not use!
 No cracks in the blade?
Check: Knock with piece of wood
Blade reverberates = OK
Blade sounds dull = do not use! (Exception: Sandwich-type silent blades)