Lissmac MULTICUT 550 GH, Operating Manual

Page: 34 / 92

34/92
5.2. Relocating by crane
WARNING
Suspended loads
Crush hazard from falling parts.

Do not step under raised machines or parts

Only use undamaged lifting devices with sufficient load capacity and length
 The machine may only be moved in the transport position
Sequence •
Establish the transport position (see 5.1)
•
Hang the floor saw into the crane lug with a slinging means with sufficient load capacity
• Appoint a competent signalperson for the lifting process
• Use only a suitable transport vehicle with sufficient load capacity
• Lift carefully and observe the center of gravity
• Always keep an eye on the floor saw
• For recommissioning proceed in accordance with the operating manual