Lissmac MULTICUT 550 GH, Operating Manual

Page: 33 / 92

33/92
5. TRANSPORT
5.1. Transport position
WARNING
Crush hazard from unsecured machine
Injuries through unintentional position change of the machine or falling of parts.
 Only transport the floor saws in the transport position

Secure the floor saw via the attachment point
NOTICE
Transport of the machine
Large inclined positions must be avoided during the transport of the floor saw.
Fuel can spill or engine oil can enter the combustion chamber of the motor and damage the motor.
Maximum inclination in all directions 30°. Only transport in an upright position.
All movable parts, which could fall, swing during transport must be removed.
Transport position
• Stop engine
• Activate parking lock
• Remove blade guard
•
Remove saw blade
•
Fold up and secure steering rod with rope
•
Remove handle bars
•
Remove or secure any loose parts