Lincoln 1997 Town Car Owner'S Manual Download Page 92

Page: 92 / 305

To close from vent position, press and hold the rear
portion of the switch.

Occasionally wiping the outside guide rail covers of
the moon roof with a clean cloth will help keep the
moon roof working properly.

The moon roof

WARNING

Do not let children play with the moon
roof. They may seriously hurt
themselves.

Sliding Shade

The moon roof has a sliding shade that you can
manually open or close to block the sun when the
glass panel is shut.

To close the sliding shade, pull the shade toward
the front of the vehicle. The shade automatically
opens and locks when the moon roof is opened.

File:05fncft.ex

Update:Mon Jun 17 13:49:49 1996

Summary of Contents for 1997 Town Car


















































































































































































































































































































Search results

Summary of Contents for 1997 Town Car

Reviews:

Related manuals for 1997 Town Car

Brands by name

Popular brands

Lincoln 1997 Town Car, Owner'S Manual

Search results

Summary of Contents for 1997 Town Car

Reviews:

Related manuals for 1997 Town Car

Brands by name

Popular brands