LightLink-CXL – Service Manual
Rev. No. : 01
Page
49
of
98
B. Aiming Module Replacement
Removal
1.
Remove the laser head cover off (both the front and rear cover)
2.
Disconnect the aiming connector (Depending on the which one)
3.
Loosen the screw by using 3.0 mm Allen key
4.
Gently and slowly remove the laser diode and holder
Note: Do remember to tag all the connectors
Figure 6.3 Aiming set screw
Figure 6.4 Aiming connectors
Two aiming connectors
Set screw
Summary of Contents for LightLink-CXL
